How To Maintain The Tornador Cleaning Guns?

MARFLO supply all repare parts (spare parts) of tornador.  
but it is better for good maintain for tornadors, all tornador cleaning gun must be good maintaining; 
it is better for long life to use. 

Maintaining your Tornador cleaning tool is essential to ensure its longevity and optimal performance. Here are some steps and tips to help you properly maintain your Tornador:

1. Regular Cleaning After Use

- Flush the Tool: After each use, run clean water through the Tornador to flush out any remaining cleaning solution. This prevents buildup and clogging.

 - Disconnect the solution container.

 - Fill the container with clean water.

 - Run the Tornador until the water comes out clear.

- Clean the Nozzle: The nozzle can accumulate dirt and residue, so ensure it is clean and free from obstructions.

 - Use a soft brush or cloth to clean the exterior.

 - For stubborn buildup, disassemble the nozzle and clean it thoroughly.

2. Inspect and Replace Worn Parts

- O-Rings and Seals: Regularly check the O-rings and seals for wear and tear. Replace them if they appear damaged or worn out.

- Nozzle and Tube: Inspect the nozzle and internal tube for signs of wear or damage. Replace any components that show significant wear to maintain performance.

3. Lubrication

- Lubricate Moving Parts: Apply a small amount of lubricant to the moving parts of the Tornador, such as the trigger mechanism, to ensure smooth operation. Use a lubricant recommended by the manufacturer.

4. Proper Storage

- Dry Storage: Ensure the Tornador is completely dry before storing it to prevent rust and mold growth.

- Avoid Direct Sunlight: Store the Tornador in a cool, dry place away from direct sunlight to prevent damage to plastic and rubber components.

5. Air Compressor Maintenance

- Check Connections: Ensure all connections between the Tornador and the air compressor are secure and free from leaks.

- Proper Air Pressure: Maintain the recommended air pressure (typically 60-90 psi) to avoid overworking the tool and air compressor.

- Clean Air Supply: Use an air filter to ensure clean air supply to the Tornador, preventing debris from entering and causing damage.

6. Periodic Deep Cleaning

- Disassemble and Clean: Periodically disassemble the Tornador for a thorough cleaning. Clean all parts with mild soap and water, then rinse and dry completely before reassembling.

- Inspect for Damage: During disassembly, inspect all parts for signs of damage or excessive wear. Replace any damaged components.

7. Follow Manufacturer’s Instructions

- User Manual: Refer to the user manual for specific maintenance guidelines and recommendations from the manufacturer.

- Recommended Products: Use only recommended cleaning solutions and lubricants to avoid damaging the tool.

Summary of Maintenance Steps

1. Regular Cleaning: Flush with water after each use and clean the nozzle.

2. Inspect and Replace Parts: Check O-rings, seals, and nozzles regularly.

3. Lubrication: Apply appropriate lubricant to moving parts.

4. Proper Storage: Store in a dry place away from sunlight.

5. Air Compressor Maintenance: Ensure clean air supply and proper air pressure.

6. Periodic Deep Cleaning: Disassemble and clean periodically.

7. Follow Manufacturer’s Instructions: Adhere to guidelines in the user manual.

By following these maintenance steps, you can ensure your Tornador remains in good working condition, providing effective and reliable cleaning for years to come.